Skip to main content

HANA System Replication - Prerequisites & Setup


Hey Folks! Welcome back to Hana high availability blog series. In our last blog we checked out operation & replication modes in hana system replication. If you haven't gone though that blog, you can checkout this link

In this blog we will be talking about the prerequisites of hana replication and it's setup. So let's get started.

When we plan to setup hana system replication, we need to make sure that all prerequisite steps have been followed. Let's have a look at these prerequisites.

HANA System Replication Prerequisites:

  • Primary & secondary systems should be up & running
  • HDB version of secondary should be greater than or equal to Primary database sever
  • But, for Active/Active(read enabled config), HDB version should be same on both sites.
  • System configuration/ini files should be identical on both sides
  • Replication happens for the whole system and can't be tenant/database specific
  • Number of worker nodes and role configuration on both sites should be same. Standby nodes need not to be same.
  • Systems should not be on the same host. Hostnames should be different.
  • Both systems should have same SID and instance number.
  • Replication related ports with default port offset 10000 should be available.
  • Initial backup should have been done for the primary system's databases.
  • Log mode should be 'normal'
  • Should have sidadm access
  • System PKI SSFS .key and the .dat files must be copied from the primary system to the secondary system
    • /usr/sap/<SID>/SYS/global/security/rsecssfs/data/SSFS_<SID>.DAT
    • /usr/sap/<SID>/SYS/global/security/rsecssfs/key/SSFS_<SID>.KEY
      For XS advanced, following files should also be copied
    • /usr/sap/<SID>/SYS/global/xsa/security/ssfs/data/SSFS_<SID>.DAT 
    • /usr/sap/<SID>/SYS/global/xsa/security/ssfs/key/SSFS_<SID>.KEY
  • In a system replication landscape the systems on all sites must run on platforms with the same byte order. System replication is supported between Intel little-endian and IBM Power little-endian systems
  • If you plan to add SAP HANA dynamic tiering to your landscape in the future, seeSAP Note 2447994 before you enable HANA system replication
Now let's see how to enable/disable hana replication and change replication mode. All below operations should be performed as <sid>adm

Setup/Enable SAP HANA System Replication:

  1. Login to primary and enable replication
    hdbnsutil -sr_enable --name=<Sitename>
    where, name -> can be anything

  2. Stop secondary server
    sapcontrol -nr <inst_no> -function StopSystem HDB

  3. Register replication on secondary
    hdbnsutil -sr_register --remoteHost=<primary_hostname> --remoteInstance=<Inst_no> --replicationMode=<sync/syncmem/async> --name=<Sitename_secondary> --operationMode=<logreplay/delta_datashipping>

  4. Start secondary server
    sapcontrol -nr <inst_no> -function StartSystem

  5. Replication check on Primary System
    hdbnsutil -sr_state

    cd /usr/sap/<SID>/HDB<inst_no>/exe/python_support
    $ python systemReplicationStatus.py

Disable SAP HANA System Replication with hdbnsutil

  1. Stop secondary system
    sapcontrol -nr <inst_no> -function StopSystem HDB

  2. Unregister the secondary system as follows:
    hdbnsutil –sr_unregister
    For other use cases of the command hdbnsutil –sr_unregister, see SAP Note 1945676.

  3. Disable system replication on the primary system as follows:
    hdbnsutil –sr_disable

  4. Start secondary server
    sapcontrol -nr <inst_no> -function StartSystem HDB

If system replication is out of sync and you need to register again the initial secondary system, use the command hdbnsutil –sr_register. It is not needed to unregister the secondary system before registering it again.

SAP HANA System Change Replication Mode

  1. Stop the secondary system using the command:
    sapcontrol -nr <inst_no> -function StopSystem

  2. Run the command:
    hdbnsutil -sr_changemode --mode=sync|syncmem|async

  3. Start the secondary system using the command:
    sapcontrol -nr <inst_no> -function StartSystem

To change operation mode, we need to re-register replication with the required mode.

That was all about prerequisites and setup of hana system replication. Hope you now have a better understanding of Hana System replication concepts.

Comments

  1. Mike17 November 2022 at 12:07

    Hello,
    Many Thanks for this blog.
    What happens when the primary site (hana system) has an error and that is then replicated to the secondary site.

    How does the secondary side know that there was an error on the primary side?

    Can I then start the secondary site ? Will it also have the same error?

    Many Thanks

    ReplyDelete
  2. Ziya23 August 2023 at 22:28

    ReplyDelete
  3. Anonymous2 December 2023 at 10:21

    Could you please help withsystem replication setup with auto-failover through pacemaker cluster?

    ReplyDelete

Post a Comment

You might find these interesting

Notes for Build Resilient Applications on SAP BTP with Amazon Web Services [ Week 1]

Welcome back to the next chapter in our ongoing series dedicated to unraveling the dynamic interplay between SAP Business Technology Platform (BTP) and Amazon Web Services (AWS). For those just joining us, this blog serves as an invaluable resource for individuals delving into the world of SAP BTP or seeking a comprehensive reference guide. SAP BTP, or SAP Business Technology Platform, is a comprehensive platform that brings together various essential capabilities for application development, automation, data management, analytics, planning, integration, and AI. These features are all integrated into a unified environment, making it user-friendly for both professional IT developers and citizen developers. Image Credit  Key Features of SAP BTP: Application Development: SAP BTP offers a range of tools for development. For instance, SAP Build enables low-code development, while the SAP Business Application Studio caters to core developers, providing services like document management a...
1 comment
Read more

8 Must-Know Questions About Object Store on SAP Business Technology Platform

What is the problem that Object Store solves ? Modern enterprise systems increasingly deal with massive volumes of unstructured data such as documents, logs, media files, and backups. Traditional relational databases are not optimized for such workloads. What is Object Store ? Object storage—commonly referred to as blob storage—addresses this gap by providing scalable, durable, and cost-efficient storage for unstructured data. Object storage is a storage architecture designed to manage unstructured data as discrete units called objects.  Each object consists of: Binary data (file content) : Image , File etc Metadata (descriptive attributes) : File size, Content type, Last modified timestamp, Storage class (hot, cool, archive) Unique identifier (key or URL) : unique path-like string used to locate a blob inside a bucket Unlike file systems or relational databases, object storage does not rely on hierarchical file structures or schemas. The SAP BTP Object Store service is a managed, ...
Post a Comment
Read more

Understanding SAP BTP Global Accounts, Directories, Subaccounts, and Entitlements

In SAP Business Technology Platform (BTP), organizing your resources effectively is crucial for efficient management and scalability. This blog provides a comprehensive overview of global accounts, directories, subaccounts, and entitlements within SAP BTP. What is a Global Account in SAP BTP? A global account in SAP BTP represents the contractual agreement you have with SAP. It serves as the top-level container for managing various resources, including directories, subaccounts, members, entitlements, and quotas. Within a global account, you receive entitlements and quotas for platform resources, which can be allocated to subaccounts for actual consumption. How Do Directories Function in SAP BTP? Directories in SAP BTP allow you to organize and manage your subaccounts based on your technical and business requirements. A directory can contain other directories and subaccounts, enabling you to create a hierarchical structure. This hierarchy can be up to 7 levels deep, with the global ac...
Post a Comment
Read more

How to properly Start/Stop SAP system through command line ?

Starting/stopping an SAP system is not a critical task, but the method that most of us follow to achieve this is sometimes wrong. A common mistake that most of the SAP admins do is, making use of the 'startsap' and 'stopsap' commands for starting/stopping the system.  These commands got deprecated in 2015 because the scripts were not being maintained anymore and SAP recommends not to use them as many people have faced errors while executing those scripts. For more info and the bugs in scripts, you can check the sap note 809477.  These scripts are not available in kernel version 7.73 and later. So if these are not the correct commands, then how to start/stop the sap system?  In this post, we will see how to do it in the correct way. SAP SYSTEM VS INSTANCE In SAP, an instance is a group of resources such as memory, work processes and so on, usually in support of a single application server or database server with...
25 comments
Read more

KPIs for Recovery in HANA Database Administration

Introduction: In the dynamic landscape of database administration, ensuring the robustness of a system is paramount. One crucial aspect that demands meticulous attention is the recovery process following a system failure. Two key performance indicators (KPIs) stand out in this realm – Recovery Point Objective (RPO) and Recovery Time Objective (RTO) . In this technical blog, we will delve into the significance of these KPIs for HANA database administrators and explore strategies to optimize them. Recovery Point Objective (RPO): RPO is a critical metric that defines the maximum acceptable data loss in the event of a system failure . For HANA database administrators, establishing an RPO involves a careful balance between data consistency and the overhead of continuous data replication. Continuous Data Backups: To meet stringent RPO requirements, implementing continuous data backups is imperative. Utilizing HANA's native backup capabilities and integrating them with a robust backup s...
Post a Comment
Read more

Huge Multiversion Concurrency Control (MVCC) Versions in HANA

What is MVCC? MVCC is a database concurrency control method that allows multiple transactions to occur concurrently without conflicting with each other. In a nutshell, it ensures that each transaction sees a snapshot of the database at a specific point in time, even if other transactions are making changes concurrently. MVCC in SAP HANA: SAP HANA uses MVCC to manage concurrent access to data. Each transaction in HANA sees a consistent snapshot of the data at the time the transaction began. This is achieved by maintaining multiple versions of a data row, each associated with a specific transaction or point in time. The Issue of Huge MVCC Versions: Now, the term "Huge MVCC Versions" indicates a situation where there is a significant number of these versions for a particular set of data. Here's why this might become a problem: Increased Memory Usage: Each version of a data row consumes memory. As the number of versions increases, the overall memory consumption by the databas...
Post a Comment
Read more

Execute HANASitter for hang situation analysis

The SAP HANAsitter is configured to perform default checks once every hour to ascertain the online and primary status of SAP HANA. Upon confirmation, it initiates tracking procedures, which involve regular responsiveness assessments (typically every minute). If SAP HANA becomes unresponsive, the HANAsitter commences recording activities, potentially capturing call stacks of active threads, run-time dumps, index server gstacks, and/or kernel profiler traces, although, by default, no recording occurs. When SAP HANA is responsive, the script scrutinizes critical features, including a standard check for more than 30 active threads. If this threshold is exceeded, the script triggers recording. Upon completing the recording process, the script exits, with an option to be configured for restart using the command line. Setup Steps Overview: Begin by creating an SAP HANA user with the desired name (e.g., HANASITTER) and assign the CATALOG READ privilege to it. Establish a user key in the hdbuse...
Post a Comment
Read more

Deploying SAP on Google Cloud : Part 1

 Connect to Google  Connection Method To be Used for Speed Explanation Example Uses Cloud VPN Proof of Concept Variable, up to 3 Gbps Connects on-premises network to Google Cloud securely over the internet using IPsec VPN tunnels. Creating a Cloud VPN tunnel between on-premises and Google Cloud. Encrypted IPsec tunnels Dedicated Interconnect For Enterprise level connect 10 Gbps to 100 Gbps Provides a dedicated, private connection between on-premises and Google Cloud through Google's network. Provisioning a dedicated interconnect connection. Direct physical connection between on-premises and Google Cloud network infrastructure Partner Connect If you have a data center which cannot be reached to Dedicated Google facility. Variable, up to 100 Gbps Allows connecting to Google Cloud through supported service providers. Establishing a connection with a supported service provider. Utilizes service provider's network infrastructure. Configure Tunnels with Google Cloud Platform IPsec
Post a Comment
Read more

Building the Foundation of the PO System: Architecture and some terminologies

1. Loosely Coupled and Tightly Coupled Services : Loosely Coupled Services : These services interact with each other with minimal dependencies. Changes in one service don't significantly impact others. Pros include flexibility, easier updates, and better scalability. A common example in PO is when a shipping service communicates with an inventory service. Changes in the inventory service won't necessarily disrupt shipping. Tightly Coupled Services : These services are interdependent, so changes in one service can affect others. While they might provide faster communication, they can be less flexible and harder to maintain. For example, tightly coupling an order processing service with a payment service means any change in payment could ripple to order processing. 2. SOA - Service-Oriented Architecture : SOA is an architectural approach where everything is treated as a service, encapsulating specific functionality. Service Orchestration Example (Banking Transaction) : Consider ...
2 comments
Read more

Work Process and Memory Management in SAP

Let’s talk about the entire concepts that are related to memory when we talk about SAP Application. Starting with few basic terminologies, Local Memory :  Local process memory, the operating system keeps the two allocation steps transparent. The operating system does the other tasks, such as reserving physical memory, loading and unloading virtual memory into and out of the main memory. Shared Memory :  If several processes are to access the same memory area, the two allocation steps are not transparent. One object is created that represents the physical memory and can be used by various processes. The processes can map the object fully or partially into the address space. The way this is done varies from platform to platform. Memory mapped files, unnamed mapped files, and shared memory are used.  Extended Memory : SAP extended memory is the core of the SAP memory management system. Each SAP work process has a part reserved in its virtual address space for extended memory...
7 comments
Read more